Your shopping cart is empty!
Your shopping cart is empty!
Spare Product, Provides physical line termination for multiple DS-0 channels, Uses onboard HDLC controllers to terminate digital (ISDN) calls, Data rate (per port): number x 56 or number x 64 kbps, where number = 1 to 24, Two Bantam ports, which can be used to monitor a line, CAS is supported with R2 signalingManufacturer: Cisco Systems, Inc Manufacturer Part Number: AS535-DFC-2CT1= Brand Name: Cisco Product Name: 2-port T1 Dial Feature Card Product Type: Expansion Module Application/Usage: Data Networkin..
The Cisco VWIC-2MFT-T1-DIR and VWIC-2MFT-E1-DIR Voice/WAN Interface Cards support data applications on the Cisco MWR 1941-DC Mobile Wireless Edge Router for T1/E1 networks. These cards are dual-port, T1/Fractional T1 or E1/Fractional E1, Drop and Insert Multiplexers with integrated T1 CSU/DSUs or E1 DSUs. The T1 version supports framed and unframed traffic, and the E1 version supports framed traffic and unframed traffic that conforms to the ITU-T G.703 standard for full 2.048 Mbps bandwidth.The Drop and I..
Network modules provide enterprises, managed service providers, and service providers with the ability to directly connect the public switched telephone network (PSTN), traditional telephony equipment (such as private branch exchange (PBX), key systems, analog telephones, and fax machines.This Module includes two built-in T1/E1 ports and a VIC/VWIC slot that can be fitted with either digital or analog/BRI voice/WAN interface cards. Supports a maximum of 120 channels of digital voice, or 60 channels of di..
-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card2-port T1/E1 multiflex trunk (MFT) voice/WAN interface card (multiflex VWIC), which support data and voice applications in Cisco multiservice routers. The multiflex VWIC combines WAN interface card (WIC) and voice interface card (VIC) functionality to provide additional flexibility in by supporting T1, fractional T1, E1, and fractional E1 for both voice and WAN applications.Product Type: Voice/WAN Interface Card Application/Usage: Voice Interfaces/Port..
The 2-port T1/E1-RAN Optimization Interface Card is a general-purpose T1/E1 voice/WAN interface card (VWIC) that features advanced processing and T1/E1 protection switching and is specifically designed for the Cisco RAN Optimization solution.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: VWIC-2T1/E1-RAN Brand Name: Cisco Product Name: 2-port T1/E1-RAN Optimization Interface Card Product Type: Voice/WAN Interface Card Application/Usage: Voice Interfaces/Ports: 2 x T1/E1 WAN Interfaces/Ports Det..
The 2-port channelized T1/ISDN-PRI network module supports two channelized T1/ISDN PRI connections via DB-15 connectors.ISDN Concentration, LAN-to-LAN Routing, Serial & Legacy Concentration, VPN & Firewall Solutions, Receiver sensitivity: 14 dB, For reliable operation, a 3 dB margin is recommended, Each port is configured independently. You can configure one port for ISDN PRI and the other for channelized T1.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: NM-2CT1= Brand Name: Cisco Product Mo..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: CX-MIP-2CT1 Brand Name: Cisco Product Model: CXMIP2CT1 Product Name: 2-Port T1/PRI Multichannel Interface Processor Product Type: Interface Processor Application/Usage: Data Networking Interfaces/Ports: 2 x Channelized T1/ISDN PRI WAN Interfaces/Ports Details: 2 x Channelized T1/ISDN PRI WAN Data Transfer Rate: 1.54 Mbps T1 Additional Information: Integrated CSU/DSUs Compatibility: Cisco 7000 Series Routers, Cisco 7500 Series Routers..
This module is a single-width port adapter that provides two T3 interface connections using BNC connectors. The T3 link provides a single high-speed user data channel that appears to the system as a serial interface that may be configured to use the full T3 bandwidth or a smaller portion of the T3 bandwidth.High-speed High-Level Data Link Control (HDLC) data, Integrated data service unit (DSU) functionality, Support for 16- and 32-bit cyclic redundancy checks (CRCs), Support for G.751 framing or bypass fr..
The two-port FXO voice/fax interface card for Cisco voice/fax network modules is used to connect to PBX or key system, and to provide off-premise connections for Europe only. This voice interface card works with existing phone and fax equipment to provide voice and fax services over IP, and is compatible with H.323 standard for audio and videoconferencing.Voice & Fax Integration, VPN & Firewall Solutions, Provide voice and fax services over IP, Used to connect to a PBX or key system, and provide off-premi..
Cisco 2600, 3600, and 3700 low density voice/fax network module provides enterprises, managed service providers and service providers the ability to directly connect the PSTN and legacy telephony equipment to existing Cisco 2600, Cisco 3600, and Cisco 3700 routers. This provides immediate multiservice advantages, such as telephony toll bypass, new packet telephony applications, and full gateway integration within a Cisco AVVID architecture.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: VIC-2FX..
ISDN Voice Interface Cards (VICs) connect directly to Public Switched Telephone Networks (PSTNs), Private Branch Exchanges (PBX), and Private Access Branch Exchanges (PABX), supporting both on-premise and off-premise connections. The VIC2-2BRI-NT/TE cards are new generation VICs that are a hardware refresh of the older cards of the similar functionality, with resolved manufacture component issues. ISDN BRI NT/TE voice interface card (VIC2-2BRI-NT/TE) have the same capabilities as the S/T card, but can also ..
The two-port FXO voice/fax interface card for Cisco voice/fax network modules is used to connect to PBX or key system, and to provide off-premise connections. This voice interface card works with existing phone and fax equipment to provide voice and fax services over IP, and is compatible with H.323 standard for audio- and videoconferencing.Voice & Fax Integration, VPN & Firewall Solutions, Provide voice and fax services over IP, Compatible with H.323 standard for audio and videoconferencing, Used to conn..
(VIC2-2FXO=) include 2-port foreign exchange office (FXO) analog interface cards. This card cover a full range of digital voice and WAN connectivity options and provide connectivity to the world's PBXs, PSTNs, and Post, Telephone, and Telegraph (PTT) organizations.Supports Centralized Automatic Message Accounting (CAMA) with software configuration, Loop Start Supported, Voice and Fax IntegrationProduct Name: 2-Port Voice Interface Card FXO Universal Product Type: Voice Interface Card (VIC) Application/U..
The VIC-2FXO-M1 provides immediate multiservice advantages, such as telephony toll bypass, new packet telephony applications, and full gateway integration within Cisco AVVID architecture...
With voice/fax network modules, the Cisco multiservice access routers offer unparalleled multifunctional capabilities in a branch office solution, building on Cisco's strengths in LAN-to-LAN routing and dial access. The voice/fax network modules for the Cisco multiservice access routers enable packet voice technologies including VoIP and VoFR. Cisco's voice solutions provide the means for integrating both voice and data within a single network and allow users to take advantage of services, such as toll-bypa..
A Foreign Exchange Station (FXS) interface connects directly to a standard telephone, fax machine, or similar device and supplies ring, voltage, and dial tone. The Cisco FXS interface is an RJ-11 connector that allows connections to basic telephone service equipment, keysets, and private branch exchanges (PBXes).Product Name: 2-Port Voice Interface Card FXS (Refurbished) Product Type: Interface Module Compatibility: Cisco Networking Products: 1700, 1710, 1711, 1712, 1720, 1721, 1751, 1760, 2610, 2610XM, 2..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: BPXSMFLR6222BC Brand Name: Cisco Product Model: BPXSMFLR6222BC Product Name: 2-port, OC-12/STM-4 Back Card Product Type: Service Module Application/Usage: Data Networking Interfaces/Ports: 2 x OC-12/STM-4 Interfaces/Ports Details: 2 x OC-12/STM-4 Connectivity Media: Single-mode Fiber OC-12/STM-4 Data Transfer Rate: 622.08 Mbps OC-12/STM-4 Additional Information: Distance: 40Km Compatibility: Cisco BPX 8600 Series multiservice switches..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: MGX-BNC-2T3 Brand Name: Cisco Product Model: MGX-BNC-2T3 Product Name: 2-ports T3 Backcard Broadband Network Module Product Type: Service Module Application/Usage: Data Networking Interfaces/Ports: 2 x T3 Interfaces/Ports Details: 2 x BNC T3 Connectivity Media: Coaxial Data Transfer Rate: 44.74 Mbps T3 Compatibility: Cisco MGX 8850 Processor Switching Module (PXM)..
