Your shopping cart is empty!
Your shopping cart is empty!
The module has cPCI bus control circuitry that is used when it is installed in the top slot of the Cisco IPVC 3544 chassis. The module supports hot swapping when it is installed in chassis slots two, three, and four.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: IPVC-3540-MC03A= Brand Name: Cisco Product Model: IPVC-3540-MC03A Product Name: IPVC-3540-MC03A 1-Port MCU Module Product Type: Interface Module Application/Usage: Data Networking Interfaces/Ports: 1 x 10/100Base-TX Interfaces/Ports De..
The PA-MC-E3 Multi-Channel E3 port adapter is available on Cisco 7200 series routers, on Cisco 7500 series routers, and on Cisco 7000 series routers with the 7000 Series Route Switch Processor (RSP7000) and 7000 Series Chassis Interface (RSP7000CI).The PA-MC-E3 has one channelized E3 high-speed serial interface that provides access to services at E1 (2.048 Mbps) data rates, transferring data bidirectionally. This port adapter divides the E3 signal stream into 16 E1 lines that can be further divided int..
This Cisco 1 Port Multichannel T3 Enchanced Capability Port Adaptor supports Cisco High-Level Data Link Control (HDLC), Frame Relay, PPP, and Switched Multimegabit Data Service (SMDS) Data Exchange Interface (DXI) encapsulations over the serial interface. This Port Adapter is designed to receive and transmit at the DSX-3 level while driving and receiving from 75-ohm coaxial cables (ATT 734A or equivalent quality coaxial cable). The T3 port connects directly to any equipment with DSX-3-level BNC connectors. ..
Cisco Multiflex Trunk Voice and WAN network interface module NIM-2CE1T1-PRIThe Cisco® Fourth-Generation 2-Port T1/E1 Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) NIM-2CE1T1-PRI supportS data and voice applications on the Cisco 4000 Integrated Services Routers. These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide superior flexibility, versatility, and investm..
Basic T1/E1 data: The MFT versions act as WICs, supporting T1, fractional T1, E1, and fractional E1. To simplify remote management, these modules integrate a fully managed DSU/CSU for T1 deployments and a fully managed DSU for E1 deployments.E1/G.703 data: In addition to the basic T1/E1 data support, the CE1T1 versions also support structured G.703 with G.704 framing and unstructured E1 (G.703) applications.T1/E1 packet voice: All the modules support packet voice applications by providing T1, fractional..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: SMFIR-622-SFP= Brand Name: Cisco Product Model: SMFIR-622-SFP Product Name: SMFIR-622-SFP 1-Port OC-12 Intermediate Reach SFP Module Product Type: SFP Application/Usage: Data Networking Interfaces/Ports: 1 x OC-12 Interfaces/Ports Details: 1 x OC-12 Connectivity Media: 9/125 µm Single-mode OC-12 Data Transfer Rate: 622 Mbps OC-12 Additional Information: Spare Product, Wavelength : 1310 nm Compatibility: MGX-2OC12POS Back Card..
SR-1OC12-ChSTM4 1 pt OC12 chan. STM4 SDH SM line card for Cisco 10000 series routers...
This OC12 IR/STM4 SH 1310 card provides one intermediate or short range, ITU-T G.707, ITU-T G.957-compliant, SDH STM-4 port. The interface operates at 622.08 Mbps over a single-mode fiber span. The card supports concatenated or non-concatenated payloads on a per VC-4 basis.Spare Product, Center Wavelength: 1274 nm /1356 nm, Nominal Wavelength: 1310 nmManufacturer: Cisco Systems, Inc Manufacturer Part Number: 15454E-S4.1-1= Brand Name: Cisco Product Model: 15454E-S4.1-1 Product Name: 1-port OC-12/STM-4 C..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: 15454-OC12IR1310 Brand Name: Cisco Product Model: 15454-OC12IR1310 Product Name: 1-Port OC-12/STM-4 Optical Card Product Type: Fiber Module Application/Usage: Optical Network Interfaces/Ports: 1 x OC-12/STM-4 Interfaces/Ports Details: 1 x OC-12/STM-4 Connectivity Media: Fiber OC-12/STM-4 Data Transfer Rate: 622.08 Mbps OC-12/STM-4 Additional Information: Intermediate Reach, Wavelength: 1310 nm Compatibility: Cisco ONS 15454 Multiservice Platform..
The OC-12c/STM-4c POS line card provides the Cisco 12000 Series Router with a single 622-Mbps POS interface on a single card. The card interfaces with the switch fabric of the Cisco 12000 Series Router and provides one OC-12c/STM-4c duplex SC single-mode SONET/SDH connection. This connection is concatenated, which provides for increased efficiency by eliminating the need to partition the bandwidth.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: LC-1OC12/POS-SM Brand Name: Cisco Product Name: OC..
The Cisco 1-Port OC-12 POS SPA is available on high-end Cisco routing platforms, offering the benefits of network scalability with lower initial costs and easy upgrades. The Cisco SPA/SIP portfolio continues Cisco's focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows different interfaces (packet over SONET/SDH [POS], ATM, Ethernet, etc.) to be deployed on the same interface processor. The Cisco 1-Po..
This Cisco 1-port OC-12c/STM-4 ATM Shared Port Adapter is targeted for all telcos and Internet service providers (ISPs). This module is designed to support the convergence of data, voice, and video services that allow customers to migrate existing voice and video traffic onto a corporate data network for substantial cost savings. This Cisco ATM SPA include a comprehensive ATM feature set including per-virtual circuit and per-virtual path traffic shaping, ATM service classes including constant bit rate (CBR)..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: BPX-BXM-622-DX= Brand Name: Cisco Product Model: BPX-BXM-622-DX Product Name: 1-port OC-12c/STM-4 Card Product Type: Expansion Module Application/Usage: Data Networking Interfaces/Ports: 1 x OC-12c/STM-4 Interfaces/Ports Details: 1 x OC-12c/STM-4 Connectivity Media: Fiber Data Transfer Rate: 622.08 Mbps OC-12c/STM-4 Compatibility: Cisco BPX 8600 Series Multiservice Switches..
The OC-12c/STM-4 POS/SDH Line Card is a versatile, high-performance line card well suited for a variety of applications including high-speed WAN uplinks in a CPE deployment, high-speed enterprise backbone, and high-speed uplink for Cisco 7300 deployment as a medium density, medium speed edge-aggregation router in tier 2 and 3 service provider POPs.Intermediate Reach, Short, Intermediate, and Long Reach optics, Point-to-Point Protocol (PPP), PPP in High-Level Data Link Control (HDLC) like Framing, SONET/SD..
The Cisco 7304 1-Port OC-12c/STM-4c ATM Line Card delivers the versatility and high performance to benefit a variety of applications. These applications include high-speed WAN uplinks in customer premises equipment (CPE) deployments, high-speed enterprise backbone networks, and high-speed uplinks for the Cisco 7304 Router as a medium-density, medium-speed, edge-aggregation router in Tier 2 and 3 service provider points of presence (POPs). The line card uses Small Form-Factor Pluggable (SFP) optics to provid..
The OC-12c/STM-4c POS line card provides the Cisco 12000 Series Router with a single 622-Mbps POS interface on a single card. The card interfaces with the switch fabric of the Cisco 12000 Series Router and provides one OC-12c/STM-4c duplex SC single-mode or multimode SONET/SDH connection. This connection is concatenated, which provides for increased efficiency by eliminating the need to partition the bandwidth.Manufacturer: Cisco Systems, Inc Manufacturer Part Number: LC-1OC12/POS-MM Brand Name: Cisco Pro..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: WAI-OC12-1SSLR= Brand Name: Cisco Product Name: OC-12c/STM-4c Port Adapter Module Product Type: Port Adapter Application/Usage: Data Networking Interfaces/Ports: 1 x OC-12c/STM-4c Interfaces/Ports Details: 1 x OC-12c/STM-4c Connectivity Media: Single-mode Fiber Data Transfer Rate: 622.08 Mbps OC-12c/STM-4c Compatibility: Cisco Catalyst 8500 Series Multiservice Switch Routers..
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA is a single-height SPA that is installed in a SIP subslot. The 1-Port OC-192c/STM-64 POS/RPR XFP SPA provides SONET and SDH network connectivity with a bandwidth of 9.95 Gbps. The 1-Port OC-192c/STM-64 POS/RPR SPA uses a single,10-Gbps fixed optic receptacle allowing a connection to single-mode optical fiber. It uses fixed optical transceivers, one for receive (RX) and one for transmit (TX), for SONET and SDH connection to the network. In Cisco IOS Release 12.0(31)S..
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA uses a single-mode, 9.95 Gbps, OC-192 optical fiber (SONET STS-192c or SDH STM-64) optical transceiver module for SONET and SDH connection to the network. The 1-Port OC-192c/STM-64 POS/RPR XFP SPA is a single-height SPA that is installed in a SIP subslot. The 1-Port OC-192c/STM-64 POS/RPR XFP SPA provides SONET and SDH network connectivity with a bandwidth of 9.95 Gbps. The 1-Port OC-192c/STM-64 POS/RPR XFP SPA uses a 10-Gbps small form-factor pluggable (XFP) optic ..
The Cisco 12000 Series of packet over SONET/SDH (POS) line card deliver state-of-the-art technology to cost-effectively scale carrier-class IP/Multiprotocol Label Switching (MPLS) packet infrastructures to meet the needs of service providers around the world. The POS interfaces deliver high-performance, powerful features and a full range of interface types, speeds, and connectors, enabling deployment of high-speed core, peering, and edge applications. The POS line card provide the ideal solution to meet and..