Your shopping cart is empty!
Your shopping cart is empty!
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: DISK-300GB-6/7SER Brand Name: Cisco Product Name: SAS 300 Internal Hard Drive Product Type: Hard Drive Storage Capacity: 300 GB Maximum External Data Transfer Rate: 300 MBps (2.3 Gbps) Drive Interface: SAS Drive Interface Standard: 3Gb/s SAS Drive Type: Internal Hot Swappable: Yes Compatibility: Cisco WAE-674, WAE-7341 and WAE-7371 Wide Area Application Engine..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: A03-D146GA2 Brand Name: Cisco Product Name: SAS 600 Internal Hard Drive Product Type: Hard Drive Storage Capacity: 146 GB Maximum External Data Transfer Rate: 600 MBps (4.7 Gbps) Rotational Speed: 10000 rpm Drive Interface: SAS Drive Interface Standard: 6Gb/s SAS Drive Type: Internal Drive Width: 2.5" Hot Swappable: Yes Compatibility: Cisco UCS B-Series Blade Server..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: R200-SASCBL-001 Brand Name: Cisco Product Name: SAS Cable Product Type: Data Transfer Cable Cable Type: SAS Connector on First End: SAS Conductor: Copper Compatibility: Cisco UCS C200 M1 High-Density Rack-Mount Server..
The Cisco 2020 Service Control Engine is a network element specifically designed for carrier-grade deployments requiring high-capacity stateful application and session-based classification and control of application-level IP traffic per subscriber.4 Multimode GBE Interfaces, Number of Concurrent Subscribers: Up to 80,000, More than 600 protocols supported, Multi-protocol Label Switching traffic engineeringProduct Name: Cisco Sce 2020 Service Control Engine Multi Mode 4 Port Ge Product Type: Server Load ..
The Cisco 2020 Service Control Engine is a network element specifically designed for carrier-grade deployments requiring high-capacity stateful application and session-based classification and control of application-level IP traffic per subscriber.4 Single-Mode GBE Interfaces, Number of Concurrent Subscribers: Up to 80,000, More than 600 protocols supported, Multi-protocol Label Switching traffic engineeringProduct Name: SCE2020 Service Control Engine-Single Mode 4 Port Ge Product Type: Server Load Bala..
OPB-SCE8K-2L Optical Bypass Module follows under normal conditions, the bypass module directs traffic to flow via the Cisco SCE8000 GBE GBE. Under failure conditions, the optical bypass shortcuts the interfaces that are connected to the traffic link, and all traffic flows through the optical bypass module, bypassing the SCE platform.Product Type: Fiber Module Application/Usage: Optical Network Expansion Slots: 1 x Expansion Slot Compatibility: Cisco SCE8000 GBE platform..
The Service Control Engine (SCE) platform, which is the hardware component of the Cisco Service Control solution, is designed to support observation, analysis, and control of Internet IP traffic...
The 5-Port 10/100/1000 Gigabit Switch provides non-blocking, wire speed switching for your 10, 100, and 1000 megabit network clients. Drop this switch in place of your current workgroup hub or switch, and you can upgrade your high-requirement workstations to full Gigabit speeds as necessary, while continuing to service other clients at their current speeds. Or build your network from the ground up, with appropriate link speeds for each user's requirements. Either way, it's perfect for graphics, multimedia, ..
The 8-Port 10/100/1000 Gigabit Switch provides nonblocking, wire speed-switching for your 10, 100, and 1000 megabit network clients. Drop this switch in place of your current workgroup hub or switch, and you can upgrade your high-requirement workstations to full Gigabit speeds as necessary, while continuing to service other clients at their current speeds. Or build your network from the ground up, with appropriate link speeds for each user's requirements. Either way, it's perfect for graphics, multimedia, a..
The Cisco ONS 15454 60G/5G High-Order/Low- Order XC-VXC Cross-Connect Card (XC-VXC) increases the Cisco ONS 15454's virtual tributary (VT)1.5 and VC-12 switching matrixes by a factor of four, facilitating greater support for grooming DS-1 and E1 services and low-order members of virtual concatenation (VCAT) groups. The XC-VXC card operates in a protected 1:1 configuration, helping enable carrier-class high availability and supporting errorless side switching. The card operates in either the Cisco ONS 15454 ..
The VIP2-40 provides the same basic features as the VIP2-15 and offers support for Distributed Switching and Distributed Services. Powered by the same processor as the VIP2-15, it provides larger program memory (DRAM) to accommodate Layer 3 route information from the RSP for autonomous switching decisions, and larger packet memory (SRAM) capacity necessary for Distributed IP Services. In addition, the VIP2-40 runs a subset of Cisco IOS software to provide support for enhanced network services such as distri..
This Interface Processor is the newest and fastest second-generation Versatile Interface Processor (VIP2) available on Cisco 7500 series routers that use the Route Switch Processor (RSP), and on Cisco 7000 series routers with the 7000 Series Route Switch Processor (RSP7000) and 7000 Series Chassis Interface (RSP7000CI). The VIP2-50 provides significantly greater packet and program memory space and increased distributed switching performance.The VIP2-50 uses a single motherboard with up to two port adapter..