The Cisco CPT 200 and 600 Packet Transport Module (PTM) Line Card is a 40G line rate packet that delivers economical, scalable, highly available, and Packet Transport services through a unified Multiprotocol Label Switching (MPLS) network layer. In addition, the PTM delivers four 10-Gigabit Ethernet ports that can be used for User-to-Network Interfaces (UNI), Network-to-Network Interfaces (NNI), and enables extension of GE interfaces through the CPT 50 satellite architecture. The PTM enables Cisco CPT 200 a..
Product Name: PC 250VAC 20A Right Angle-C19 NEMA L6-20 Plug US
Product Type: Standard Power Cord
Connector on First End: 1 x NEMA L6-20P
Connector on Second End: 1 x IEC 60320 C19
Voltage Rating: 250 V AC
Current Rating: 20 A
Device Supported: SAN Switches
Compatibility: Cisco MDS 9506 Multilayer Director
Frequency: 50 Hz
Localization: United States, Japan..
The Cisco Performance Route Processor-1 is the next generation route processor for the Cisco 12000 Series. It delivers state-of-the-art technology to address the unique route processing requirements of carrier-grade IP and MPLS packet infrastructures.Spare Product, Executes routing protocol stacks, Performs all protocol communication with other routers, Builds and distributes forwarding information to all line cards
Memory: 512 MB default route memory, configurable to 2 GB, 64 MB Boot Flash, 2 MB nonvola..
The Cisco PRP-2 is the next-generation route processor for the Cisco XR 12000 and 12000 series routers, addressing the unique route processing requirements of carrier-grade IP and Multiprotocol Label Switching (MPLS) packet infrastructures.Spare Product, Two RJ-48 connectors for BITS input clocks, 40-GB hard disk drive can be optionally installed on the PRP-2 board, Executing routing protocol stacks, Performing all protocol communications with other routers, Building and distributing forwarding informatio..
The Cisco 10000 Series Performance Routing Engine 3 is a service provider edge aggregation router that offers a single solution for leased-line, ATM, Frame Relay, and broadband aggregation while providing customers with high-performance IP services, maximum platform scalability, and high availability.Service providers require scalable networks to profitably meet their customers requirements for better performance, more services, and higher reliability. Edge routers, such as the Cisco 10000 Series, will b..
The Cisco Performance Routing Engine 2 (PRE-2) is the next-generation route processor for the Cisco uBR10012 Universal Broadband Router that addresses emerging service needs. It offers cable operators the combined advantages of high performance, an unmatched Layer 3 feature set, scalability, as well as high availability for their IP-centric cable modem and set-top based applications. The Cisco PRE-2 performs Layer 2 and Layer 3 packet processing, as well as routing and system management functions. It effect..
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: CAB-ADSL-RJ11X=
Brand Name: Cisco
Product Name: Phone Cable
Packaged Quantity: 1
Product Type: Phone Cable
Connector on First End: 1 x RJ-11 Male
Connector on Second End: 1 x RJ-11 Male
Conductor: Copper
Device Supported: Phone/Modem..
PIX-1FE Fast Ethernet Card designed to work with the PIX-510, PIX-515, and PIX-520 Series Firewalls.* Product Description- Cisco Interface Module 1-port Ethernet - network adapter - 1 ports
* Device Type- Network adapter
* Form Factor- Plug-in module
* Ports Qty- 1 ports
* Cabling Type- Ethernet 10Base-T, Ethernet 100Base-TX
* Data Link Protocol- Ethernet, Fast Ethernet
* Data Transfer Rate- 100 Mbps
* Compliant Standards- IEEE 802.3, IEEE 802.3U..