3G Omnidirectional Outdoor Antenna is designed for 3G HWIC applications in the 800/850/900/1800/1900/2100 MHz frequency bands. The antenna has a nominal gain of +2 dBi for 800/850/900 MHz bands and +4 dBi for 1800/1900/2100 MHz bands. It is designed for installation on a mast or exterior wall.Product Type: Antenna
Directivity: Omni-directional
Frequency: 800 MHz, 850 MHz, 900 MHz, 1.80 MHz, 1.90 GHz, 2.10 GHz
Antenna Gain: 4 dBi
Impedance: 50 Ohm
Connector Type: TNC
Height: 16.0"
Width: 1.3"
Application/U..
The PA-MC-T3 Multi-Channel T3 port adapter is available on Cisco 7200 series routers, on second-generation Versatile Interface Processor (VIP2) in Cisco 7500 series routers, and on Cisco 7000 series routers with the 7000 Series Route Switch Processor (RSP) and 7000 Series Chassis Interface (RSP).The PA-MC-T3 has one channelized T3 high-speed serial interface that provides access to services at T1 (1.544 Mb) data rates, transferring data bidirectionally. This port adapter divides the T3 signal stream into..
The Cisco ME-3400G-2CS-A Ethernet Access Switch is a next-generation Layer 2 and Layer 3 customer-located device purposely built for service providers. Its design is based on the experience learned from today's most widely deployed access switches, the Cisco Catalyst 2950 Series and Catalyst 3550 Series.Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: ME-3400G-2CS-A
Brand Name: Cisco
Product Series: 3400
Product Model: ME-3400G-2CS-A
Product Name: ME-3400G-2CS-A Multi-layer Ethernet Access Switc..
The 2.5-Gbps multi-rate transponder (2.5G transponder) card (42.1) provides the capability to transport a wide variety of service types from 155 Mbps to 2.48 Gbps, including services such as ESCON, SONET OC-3 through OC-48, SDH STM-1 through STM-16, Gigabit Ethernet, 1- or 2-Gbps Fibre Channel, and other services, over a 100-GHz, ITU-compliant wavelength, with 50-GHz wavelength stability for future 64-channel operation. The 2.5G transponder card architecture contains a single client interface that is mapped..
The 2.5-Gbps multirate transponder (2.5G transponder) card provides the capability to transport a wide variety of service types from 155 Mbps to 2.48 Gbps, including services such as ESCON, SONET OC-3 through OC-48, SDH STM-1 through STM-16, Gigabit Ethernet, 1- or 2-Gbps Fibre Channel, and other services, over a 100-GHz, ITU-compliant wavelength, with 50-GHz wavelength stability for future 64-channel operation. The 2.5G transponder card architecture contains a single client interface that is mapped to a si..
The 2.5-Gbps multirate transponder (2.5G transponder) card provides the capability to transport a wide variety of service types from 155 Mbps to 2.48 Gbps, including services such as ESCON, SONET OC-3 through OC-48, SDH STM-1 through STM-16, Gigabit Ethernet, 1- or 2-Gbps Fibre Channel, and other services, over a 100-GHz, ITU-compliant wavelength, with 50-GHz wavelength stability for future 64-channel operation. The 2.5G transponder card architecture contains a single client interface that is mapped to a si..
This 10-Gbps Multirate Enhanced 4 Channel Transponder Card (42.1) for the Cisco ONS 15454 Multiservice Transport Platform (MSTP) simplifies the integration and transport of 10 Gigabit Ethernet, 10 Gigabit Fibre Channel, OC-192, and STM-64 interfaces and services into enterprises or metropolitan-area (metro) and regional service provider networks. The 10-Gbps transponder card provides many carrier-class features and advanced capabilities necessary to deliver 10-Gbps services, including the protocol transpare..
The AIR-ANTM4050V-R antenna operates in the 2.4- and 5-GHz bands, and is designed for use with spatial-diversity access point (AP) systems. The AIR-ANTM4050V-R antenna is compatible with Cisco 802.11a/b/g radio products using a reverse-polarity threaded Neill-Concelman (RP-TNC) connector.Environment Indoor, Peak gain: 2.4-GHz: 4 dBi, 5-GHz: 5 dBiProduct Name: Cisco 4DBI/2.4G 5DBI/5GHZ-Dual Band Ceiling Mount Antenna
Product Type: Antenna
Antenna Gain: 5 dBi
Directivity: Omni-directional
Frequency Band T..
The Cisco 3G-ANTM1919D antenna operates in the 806- to 960-MHz and 1710- to 2170-MHz frequency bands, and is designed for use with Cisco 3G wireless high speed WAN interface cards (HWICs). The Cisco 3G-ANTM1919D antenna is compatible with the Cisco 3G wireless WAN HWICs using a threaded Neill-Concelman (TNC) male connector with articulating joint.This antenna has the following features: multiband performance; articulating joint provides 0 to 90 degrees pivot and 180-degree swivel movement, allowing vertical..
The Multichannel STM-1 Port Adapter provides the solution service providers and their customers need. It reduces network complexity and provisioning time and is part of the industry's most widely deployed and trusted network platforms today. It is also backed by a world class customer support network.Wavelength: 1310 nanometers, Transmit output power: -18 to -14 dBm, Receiver sensitivity: -30 dBm, Channelized E1, fractional E1, and full-rate E1 supported, Up to 256 usable channels can be allocated among t..
Multichannel T1/E1 Port Adapter provides high capacity, large scale voice and data aggregation across wan interfaces, and interconnection to private branch exchanges (PBXs) and the Public Switched Telephone Network (PSTN).Port Configured with T1 Features: D4 Super Frame (SF) and Extended Super frame (ESF) framing, DSX-1 MIB remote access supported
Port Configured with E1 Features: Software configurable E1 national bits, HDB3, AMI encoding, CRC4 and non-CRC4 framing, DS0 drop and insertManufacturer: Cis..
This module supports voice, data, and integrated voice/data applications. For data applications, the VWIC provides a dual-port WAN Interface Card (WIC) for T1/FT1 with an integrated DSU/CSU. For a packet voice solution, the VWIC provides a dual-port Voice Interface Card (VIC) with integrated DSU/CSU, that combines with the Digital T1/E1 Packet Voice Trunk Modules...
Allows mounting to poles with a diameter between 1.5 in. and 2.5 in, Includes both elevation and polarization adjustmentManufacturer: Cisco Systems, Inc
Manufacturer Part Number: AIR-ACCMFM1400=
Brand Name: Cisco
Product Name: Multifunction Mount
Product Type: Pole Mount
Compatibility: Cisco Access Point - Aironet 1400 Series Bridge..