The Catalyst 4000 family 48-port Inline Power 10/100BaseT Ethernet switching module delivers Fast Ethernet enhancements that will carry customers forward into the new era of multiservice networking. The Inline Power 10/100BaseT Ethernet switching module supports up to 48 ports per module. Along with phone discovery, these modules support autosensing/autonegotiation to determine the speed and duplex mode of the attached device. Inline power is 48-volt DC power provided over standard category 5 UTP cable up t..
Cisco's access solutions encompass a range of access products and services to address all facets of accessing the network. Cisco Access Gateway product connects the internal telephone system to the Public Switched Telephone Network (PSTN). Cisco Access Gateways use more complex route patterns that can contain wildcards. Cisco Access gateways can route ranges of numbers with complex restrictions and manipulate directory numbers before the Cisco CallManager passes them onto an adjacent system such as a centra..
The Catalyst 4000 family has a proven track record for wiring closet connectivity. Cisco introduces the Catalyst 4006 system, expanding the breadth and depth of the advanced Catalyst 4000 family to further enhance the premier Cisco enterprise wiring-closet offerings. The Catalyst 4006 system provides a cost-effective flexible network solution that scales to meet todays high-performance needs and provides investment protection for the future. The Catalyst 4000 family, now with two chassis alternatives, provi..
The Cisco Catalyst 4000 Series 48-Port 100BASE-FX Line Card provides another alternative for the access/distribution layer of the EFM solution for those customers who choose to deploy 100-Mbps Fast Ethernet over multimode fiber. The Cisco Catalyst 4000 Series 48-Port 100BASE-FX Line Card can provide up to 240 ports of IEEE 802.3 100BASE-FX per Cisco Catalyst 4000 system, allowing service providers to run point-to-point Fast Ethernet fiber links over multimode fiber within the access/distribution layer of th..
The NetFlow Services Card adds NetFlow accounting to the Catalyst 4500 series. NetFlow accounting collects statistics on a per-flow basis. A flow is defined as a source IP address, destination IP address, IP protocol type, source Layer 4 port, and destination Layer 4 port. Without the NetFlow Services Card, the Supervisor Engine IV on the Catalyst 4500 does not support NetFlow accounting...
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: WS-X4008=
Brand Name: Cisco
Product Name: Catalyst 4000 Series Power Supply
Product Type: Proprietary Power Supply
Input Voltage: 240 V AC
Input Voltage Range: 100 V AC to 240 V AC
Frequency: 50 Hz to 60 Hz
Output Power: 400 W
Additional Information: KVA rating: 0.58 KVA, Heat dissipation: 530W maximum (1800 Btus per hour)
System Requirements: Software Version: Minimum: 12.1(11b)EW, Recommended: 12.1(12c)EW1
Compatibility: Catalyst 4000..
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: WS-X4014=
Brand Name: Cisco
Product Name: Catalyst 4000 Series Supervisor Engine III
Product Type: Supervisor Engine
Application/Usage: Data Networking
Interfaces/Ports: 1 x LAN
Interfaces/Ports Details: 1 x RJ-45 10/100Base-TX Management
Interfaces/Ports Details: 1 x RJ-45 Console
Connectivity Media: Twisted Pair 10/100Base-TX
Data Transfer Rate: 1 Gbps Gigabit Ethernet
Data Transfer Rate: 10 Mbps
Data Transfer Rate: 100 Mbps Fast Ethernet
Expansio..
The Cisco Catalyst 4000 Family Supervisor Engine IV integrates nonblocking Layer 2/3/4 switching with integrated resiliency, further enhancing control of converged networks. Converged voice/video/data networks with high availability enable business resiliency for enterprise and metropolitan (metro) Ethernet customers deploying Internet-based business applications. As a key component of Cisco AVVID (Architecture for Voice, Video and Integrated Data), the Cisco Catalyst 4000 Family extends control from the ba..
The Cisco Catalyst 4500 Series Switch expands Power-over-Ethernet (PoE) support. PoE, offers greater flexibility and mobility to users by delivering standards-based integrated power to increase network flexibility and usefulness with the support of new devices, services, and applications.Power Consumed During Operation: 65 W Power Consumed in Reset Mode: 40 W Maximum Power Per Port: 15 W Efficiency: 89% (If the powered device requires 5 W, then the switch allocates 5.6 W)Manufacturer: Cisco Systems, Inc..
The Cisco Catalyst 4500 Series Supervisor Engine II-Plus is a Cisco IOS software-based supervisor engine that meets the needs of value-conscious customers seeking a flexible and scalable LAN solution. Optimized for wiring closets for medium-sized enterprises, education customers, or small enterprises or branch offices, the Supervisor Engine II-Plus provides the resiliency and control for converged data, voice, and video networks. The Supervisor Engine II-Plus delivers non-blocking Layer 2 switching with bas..
The WS-X4012 supervisor engine is used in the Catalyst 4003 switch. This supervisor engine provides data path and data control for all network interfaces.Data path and control for all network interfaces, Hot-swappable, The 10BASE-T Ethernet management port is for network management only. This port does not support network switching, Switching fabric: One 24-Gbps switching engine, Switching throughput: 18 Mpps (Layer 2), Multilayer switching: Layer 2, Operating system: Catalyst OS, Maximum number of Media ..