Your shopping cart is empty!
Your shopping cart is empty!
The Catalyst 4000 family 48-port Inline Power 10/100BaseT Ethernet switching module delivers Fast Ethernet enhancements that will carry customers forward into the new era of multiservice networking. The Inline Power 10/100BaseT Ethernet switching module supports up to 48 ports per module. Along with phone discovery, these modules support autosensing/autonegotiation to determine the speed and duplex mode of the attached device. Inline power is 48-volt DC power provided over standard category 5 UTP cable up t..
Cisco's access solutions encompass a range of access products and services to address all facets of accessing the network. Cisco Access Gateway product connects the internal telephone system to the Public Switched Telephone Network (PSTN). Cisco Access Gateways use more complex route patterns that can contain wildcards. Cisco Access gateways can route ranges of numbers with complex restrictions and manipulate directory numbers before the Cisco CallManager passes them onto an adjacent system such as a centra..
The Catalyst 4003 chassis offers: Flexible three-slot modular chassis, with one slot reserved for a supervisor engine and two remaining slots for switched port modules Two power supply bays that support redundant (option), load-sharing, fault-tolerant AC or DC power supplies Hot-swappable fan tray bay Familiar Catalyst 6500/5000 look and feel with consistent interfaces and indicators Up to 96 10/100 or 100-FX Fast Ethernet ports, or up to 36 Gigabit Ethernet ports, can be installed into one chassis Up to 96..
The Catalyst 4000 family has a proven track record for wiring closet connectivity. Cisco introduces the Catalyst 4006 system, expanding the breadth and depth of the advanced Catalyst 4000 family to further enhance the premier Cisco enterprise wiring-closet offerings. The Catalyst 4006 system provides a cost-effective flexible network solution that scales to meet todays high-performance needs and provides investment protection for the future. The Catalyst 4000 family, now with two chassis alternatives, provi..
48V DC Power Supply for Cisco Catalyst 4000 Series Switches..
The Cisco Catalyst 4000 Series 48-Port 100BASE-FX Line Card provides another alternative for the access/distribution layer of the EFM solution for those customers who choose to deploy 100-Mbps Fast Ethernet over multimode fiber. The Cisco Catalyst 4000 Series 48-Port 100BASE-FX Line Card can provide up to 240 ports of IEEE 802.3 100BASE-FX per Cisco Catalyst 4000 system, allowing service providers to run point-to-point Fast Ethernet fiber links over multimode fiber within the access/distribution layer of th..
The NetFlow Services Card adds NetFlow accounting to the Catalyst 4500 series. NetFlow accounting collects statistics on a per-flow basis. A flow is defined as a source IP address, destination IP address, IP protocol type, source Layer 4 port, and destination Layer 4 port. Without the NetFlow Services Card, the Supervisor Engine IV on the Catalyst 4500 does not support NetFlow accounting...
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: WS-X4008= Brand Name: Cisco Product Name: Catalyst 4000 Series Power Supply Product Type: Proprietary Power Supply Input Voltage: 240 V AC Input Voltage Range: 100 V AC to 240 V AC Frequency: 50 Hz to 60 Hz Output Power: 400 W Additional Information: KVA rating: 0.58 KVA, Heat dissipation: 530W maximum (1800 Btus per hour) System Requirements: Software Version: Minimum: 12.1(11b)EW, Recommended: 12.1(12c)EW1 Compatibility: Catalyst 4000..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: WS-X4014= Brand Name: Cisco Product Name: Catalyst 4000 Series Supervisor Engine III Product Type: Supervisor Engine Application/Usage: Data Networking Interfaces/Ports: 1 x LAN Interfaces/Ports Details: 1 x RJ-45 10/100Base-TX Management Interfaces/Ports Details: 1 x RJ-45 Console Connectivity Media: Twisted Pair 10/100Base-TX Data Transfer Rate: 1 Gbps Gigabit Ethernet Data Transfer Rate: 10 Mbps Data Transfer Rate: 100 Mbps Fast Ethernet Expansio..
The Cisco Catalyst 4000 Family Supervisor Engine IV integrates nonblocking Layer 2/3/4 switching with integrated resiliency, further enhancing control of converged networks. Converged voice/video/data networks with high availability enable business resiliency for enterprise and metropolitan (metro) Ethernet customers deploying Internet-based business applications. As a key component of Cisco AVVID (Architecture for Voice, Video and Integrated Data), the Cisco Catalyst 4000 Family extends control from the ba..
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: MEM-C4K-32-RAM= Brand Name: Cisco Product Name: 32MB SDRAM Memory Module Packaged Quantity: 1 Package Type: Retail Product Type: RAM Module Memory Size: 32 MB Memory Technology: SDRAM Number of Modules: 1 x 32 MB Memory Speed: 100 MHz Memory Standard: PC100 Error Checking: ECC Signal Processing: Unregistered Plating: Gold Plated Number of Pins: 168-pin Thickness: 110.0 mil Width: 1.0" Length: 3.6" Additional Information: Refresh: 4K Compatibility: C..
The Cisco Catalyst 4500 Series Switch expands Power-over-Ethernet (PoE) support. PoE, offers greater flexibility and mobility to users by delivering standards-based integrated power to increase network flexibility and usefulness with the support of new devices, services, and applications.Power Consumed During Operation: 65 W Power Consumed in Reset Mode: 40 W Maximum Power Per Port: 15 W Efficiency: 89% (If the powered device requires 5 W, then the switch allocates 5.6 W)Manufacturer: Cisco Systems, Inc..
The Cisco Catalyst 4500 Series Supervisor Engine II-Plus is a Cisco IOS software-based supervisor engine that meets the needs of value-conscious customers seeking a flexible and scalable LAN solution. Optimized for wiring closets for medium-sized enterprises, education customers, or small enterprises or branch offices, the Supervisor Engine II-Plus provides the resiliency and control for converged data, voice, and video networks. The Supervisor Engine II-Plus delivers non-blocking Layer 2 switching with bas..
The WS-X4012 supervisor engine is used in the Catalyst 4003 switch. This supervisor engine provides data path and data control for all network interfaces.Data path and control for all network interfaces, Hot-swappable, The 10BASE-T Ethernet management port is for network management only. This port does not support network switching, Switching fabric: One 24-Gbps switching engine, Switching throughput: 18 Mpps (Layer 2), Multilayer switching: Layer 2, Operating system: Catalyst OS, Maximum number of Media ..
Product Name: Catalyst 4000 Support III CompactFlash Disk 128MB Spare Product Type: CompactFlash (CF) Card Number of Memory Cards: 1 Form Factor: CompactFlash (CF) Product Model: MEM-C4K-FLD128M= Package Type: Retail Storage Capacity: 128 MB Packaged Quantity: 1 Compatibility: Cisco Supervisor Engine III - Control processor..
The Catalyst 4000 8-Port RJ21 FXS module for the Access Gateway Module is a high-density analog phone and FAX relay interface. By providing service to analog phones and FAX machines, the eight Foreign Exchange Station (FXS) ports emulate a Public Switched Telephone Network (PSTN) central office (CO) or private branch exchange (PBX). The 8-Port RJ21 FXS module is classified as an on-premises (ONS) FXS but provides line-cross protection not usually found in non-Bellcore ONS FXS interfaces. As a result, the FX..
