Your shopping cart is empty!
Your shopping cart is empty!
The DS72 network module provides an ethernet and telnet interface to the DS Series and the DS-RPC Series. Remote users can telnet to the DS Series and communicate with any of the RS-232 devices connected to the unit through a single IP address. The DS72 also has a local RS-232 access port allowing local configuration and access as well as remote dial-up access with an external modem.Along with the standard applications, the DS72 has new and helpful user functions. With optional SNMP connectivity, a user ..
These units provide a dual-host capability, giving the user either out-of-band dial-up or inband TELNET remote access to the unit and attached equipment. The units typically utilize a DS71-MD3, coupled with a DS72 Ethernet module. This setup allows the user to dial-in to the main unit and access the DS74 serial module(s). By using the DS72 Ethernet module, the user can access the DS74 serial module(s) via the network. The bus can only be accessed by one host module at a time. If the bus is currently in..
Function: The DS2-RPC remote power switch and console access server lets the user turn on, turn off or reboot equipment connected to its four receptacles from a remote location or local terminal. It also provides console access to any device attached to its four-port RS-232 I/O module. The unit contains four individual relay-controlled AC power receptacles that are controlled by sending a short character string (command) to the RS-232 control port on the host module.Access: Depending on the host module..
The DS4D-RPC remote power switch and console access server lets the user turn on, turn off or reboot equipment connected to its four receptacles from a remote location or local terminal. It also provides console access to any device attached to its four-port RS-232 I/O module. The unit contains four individual relay-controlled AC power receptacles that are controlled by sending a short character string (command) to the RS-232 control port on the host module.Depending on the host module installed, access..
The DS74 peripheral communication module expands the DS Series host module peripheral communications to four individual channels per module.User Interface/Configuration The DS74 has four EIA-232 ports which use 8-pin modular connectors. Use the DS71 host communication module to select serial configuration for baud rate, word size, stop bits and parity for each port of the DS74.Port Selection Procedure There are two methods to select a DS74 port through the DS71 host communications module. Users can se..
BayTech's DS3-IPS remote console access server provides a cost-effective data switch designed for local and remote equipment management when interfaced with a DS host/control/remote switch module. The entire line of DS Series data switches provides excellent solutions to data communications out-of-band management.The DS3-IPS contains three plug-in module slots to accommodate DS modules. The DS3-IPS chassis and communications bus afford the flexibility to build a powerful, reliable data switch.Typical ..
The DS-Series Data Switch provides an inexpensive dial-up (out-of-band), Ethernet (in-band) or local RS-232 gateway to multiple RS-232 console ports...
The DS4-RPC remote power switch and console access server lets the user turn on, turn off or reboot equipment connected to its four receptacles from a remote location or local terminal. It also provides console access to any device attached to its four-port RS-232 I/O module. The unit contains four individual relay-controlled AC power receptacles that are controlled by sending a short character string (command) to the RS-232 control port on the host module.Depending on the host module installed, access ca..
