Your shopping cart is empty!
Your shopping cart is empty!
The TN799/TN799B C-LAN Interface simplifies the connections between adjunct equipment and DEFINITY. It provides TCP/IP connectivity over Ethernet or PPP (Point to Point Protocol) connections to applications, such as CMS Call Center, INTUITYTM, AUDIX ®, and DCS. The TN799B is required to support the TN802B or TN2302AP IP Interface operating in MedPro mode for H.323 functionality. The TN799/TN799B is also required to support ATM interfaces and WAN PNC on DEFINITY R7 or later...
Manages the Lucent Definity G3 system and executes stored programs to perform call processing and maintenanceConsists of one 80386SX, 16 MHZ, Intel processor, 7 Mbyte Flash ROM used for the system program, 4 Mbyte of DRAM used for customer translations, an interface to the MBUS, and logic to support the shadowing function in duplicated systemsMonitors its sanity and reports processor failures monitors and controls circuit pack conditions, releases or resets the processor on duplicated systems, monitors ..
Provides 8 ports for direct inward/outward dialing (DIOD) trunks Each port provides a 2-wire interface to the central office (CO) public exchange for incoming and outgoing calls CO provides caller names and numbers to the TN429D, which displays the on Definity digital voice terminals (DCP and BRI) equipped with a 32 or 40 character alphanumeric display and with System 25/Merlin 7315H and 7317H terminals supported by Definity..
TN2182B Tone ClockThe TN2182B Tone Clock is able to access tone detection, tone generator, system clock, and synchronization functions onto one circuit pack for use in standard, high, and critical reliability systems. Up to eight ports are supported for tone detection and allows fain or loss to be applied to PCM signals received from the bus.FeaturesTone generator, tone detection, system clock, and synchronization functions integration Eight ports supported for tone detection Stratum 4 enhanced clock ..
