Your shopping cart is empty!
Your shopping cart is empty!
This device occupies a single slot in the Point System chassis it is installed in and will fully support all Focal Point management features. The CPSMM-120 has a DB-9 serial interface for the CLI (command line interface) as well as a 10Base-T RJ-45 interface for network management. The CPSMM-120 should be used when the Point System chassis is intended to be used as a stand-alone device (when the user does not intend to stack multiple Point System Chassis' together).Product Type: Management Module Applicat..
The Transition Networks CPSMC1300-100 13-Slot PointSystem chassis is a 19-inch, rack-mountable chassis for selected Transition Networks media converter slide-in-modules. The CPSMC1300-100 chassis allows the network administrator to connect various copper and fiber-optic network media over protocols that include Ethernet, Fast Ethernet, DS3/E3, and OC-12 and many others.Product Name: 13-Slot Point System Converter Chassis Product Type: Media Converter Chassis Height: 3.5" Width: 17.0" Depth: 12.0" Product ..
The Transition Networks CPSMC1310-100 13-Slot PointSystem chassis is a 19- inch, rack-mountable chassis for selected Transition Networks media converter slide-in-modules. The CPSMC1310-100 chassis allows the network administrator to connect various copper and fiber-optic network media over protocols that include Ethernet, Fast Ethernet, DS3/E3, and OC-12 and many others.Product Name: 13-Slot Point System Chassis with 48 Volt Power Supply Product Type: Media Converter Chassis Height: 3.5" Width: 17.0" Dept..
The Transition Networks TN-GLC-BX-U small form factor pluggable (SFP) tranceiver modules are designed to install in any SFP port allowing for 1000Base-BX interfaces to the network through the SFP connector.Product Name: Single Fiber Cisco Compt SFP-1000BBX 1310 / 1490 RX LC Product Type: SFP (mini-GBIC) Product Model: TN-GLC-BX-U Dimensions: 0.3" Height x 0.5" Width x 2.2" Depth Application/Usage: Data Networking Interfaces/Ports: 1 x 1000Base-BX Interfaces/Ports Details: 1 x LC 1000Base-BX Data Transfer ..
The Transition Networks TN-GLC-BX-D, small form factor pluggable (SFP) transceiver module is designed to install in any SFP port allowing for 1000Base-BX interface to the network through the SFP connector.Product Name: 1490NM TX/1310NM RX LC SM 1000BASE-BX Single Fiber Cisco SFP Product Type: SFP Compatibility: Compatible with Small Form Factor Pluggable Multi-Sourcing Agreement. Product Model: TN-GLC-BX-D Dimensions: 0.3" Height x 0.5" Width x 2.2" Depth Application/Usage: Data Networking Interfaces/Port..
The C/F-SM-MM-02 media converters can be installed in any 155Mb/s (or slower) fiber network. C/F-SM-MM-02 media converters function in half-duplex mode or, when connected to devices capable of full-duplex connectivity, in full-duplex mode...
Transition Networks' Conversion Center is a high-density, multi-protocol and multi-media converter mounting option. The Conversion Center has the ability to house up to 16 Transition Networks' Slide-in-Module Media Converters, in any configuration of protocols and in a wide variety of platforms. This flexibility, along with hot-swappable, redundant power, makes the Conversion Center the most reliable, cost-effective solution for many media interface problems. This is a 16-slot chassis with 48-volt power sup..
Transition Networks Managed Industrial Switch is hardened device designed to reliably operate in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments.Product Name: 16 Port Managed 10/100 BTX 2 Port Industrial Switch Product Type: Ethernet Switch Manageable: Yes Ethernet Technology: Gigabit Ethernet, Fast Ethernet Number of Total Expansion Slots: 2 Number of Network (RJ-45) Ports: 18 Total Number of Network Ports: 18 Height: 6.0" Width: 2.8" Depth: 4...
Automatic MDI/MDIXCable detection and correction is automatic as the switch adjusts for straight-through or crossover cables during installation-no uplink port necessary.High-performance SwitchingNon-blocking architecture assures rapid packet delivery and the extensive 8,000 MAC address table and memory buffering provide swift lookup and packet forwarding.Full Duplex OperationBandwidth for each port is effectively doubled, increasing the speed of a 100 Mbps port to 200 Mbps.Flow Control..
The SM24-1000SFP-AH Gigabit Metro Ethernet Switch provides a flexible platform to enable carrier-class access technology through easy-to-maintain hardware architecture and advanced management software features.1 x RJ-45 Craft Port. Features: Auto-Negotiation, Flow Control, Link Aggregation, IGMP, Firmware & Configuration, SNTP, Port Mirroring, RADIUS Authentication, TACACS+ Authentication, SSH, Access Control List (ACL): IP-based, MAC-based, IP/MAC-based, VLAN, TCP/UDP port, Storm ControlProduct Name: M..
The switch provides a 48Gbps Gigabit switching performance with an added benefit of combining copper and fiber interfaces in a compact 1U design. The MIL-S24T2GPA delivers cost-efficient switching capability for 24 ports of Copper Gigabit Ethernet and two combo ports for SFP based Gigabit Ethernet.Product Name: 24 Port Unmanaged Switch 24 Port 10/100/1000B-T 2 SFP Ports Product Type: Ethernet Switch Ethernet Technology: Gigabit Ethernet Number of Total Expansion Slots: 2 Number of Network (RJ-45) Ports: 2..
Transition's Industrial Managed Switches with Class 1 Div 2 Certification are hardened devices designed to reliably operate in harsh environments such as those found on factory floors, outdoor enclosures, oil and gas refining, chemical plants or other hazardous environments. Full management features include support for redundant rings,VLANs, IGMP, SNMP, Web, Telnet, and CLI.Product Type: Ethernet Switch Total Number of Network Ports: 4 Number of Network (RJ-45) Ports: 4 Ethernet Technology: Gigabit Ethern..
Product Name: 48VDC 2.5A Universal AC Power Supply DIN Rail Mount Product Type: Redundant Power Supply Input Voltage Type: AC Form Factor: DIN Rail Input Voltage: 110 V AC, 220 V AC Plug/Connector: Terminal Block Compatibility: Transition Networks SISPM1040-182D-LRT Industrial PoE Switch Protection Type: Reverse Polarity, Overload Output Voltage: 48 V DC @ 2.50 A..
