Your shopping cart is empty!
Your shopping cart is empty!
The NSA 400 consists of seven discrete generation sections. The features associated with one generator operate independently of the others. However, the options within a section can only be activated one at a time. The seven sections are: •White noise generator •2 x low frequency (500 kHz) NEXT PSD generator •1 x high frequency (2.0 MHz) NEXT PSD generator •Shaped noise generator •Powerline related noise •Metallic Noise •Longitudinal Noise •Impulse Noise The output circuit is balanced with a minimum Theveni..
DS1 (1.544), ATM Smartcard module. It is compatible with the Smartbits 2000/200 Chassis.The AT-9015 is used to generate and monitor ATM network traffic. Applications include testing ATM-to-LAN internetworking devices, LAN-to-ATM, very high performance ATM backbones, xDSL devices, and edge devices. The capabilities of the ATM SmartCards include frame-level testing at full-duplex, full wire-rate testing of edge devices and switches, switch testing at full-cell rate, and high-rate signaling testing for edge ..
The DLS 5103 is a next generation impairment generator which provides narrow and broadband noise, crosstalk and transient impairments used for testing ADSL, SHDSL, HDSL, HDSL2 and ISDN. The DLS 5103 offers all of the capability of its DLS 5101 (NSA 400) predecessor in addition to refined noise shapes and additional noise shape generation capacity...
OC3/STM-1, 155Mbps, ATM module. It is compatible with the Smartbits 2000/200 Chassis...
oc3/stm1, oc12/stm4 mm pos, compatible with the SMB-600/6000B chassis...
SmartBit Netcom WN-3415 WAN T1 Frame Relay 1-port SmartMetrics Smartcard.The WN-3415 SmartCards are network performance analysis tools that performs framelevel testing at full wire-rate for Frame Relay and PPP access devices, routers, and switches. Each card provides a singleport interface for generating and monitoring data network traffic over WAN links.You can use your WN-3415 SmartCards with other SmartBits SmartCards/modules to test high-performance internetworking between Frame Relay/PPP devices an..
One port, 10/100 Base-FX Ethernet, full/half duplex, VLAN & Data Capture SmartCard. It is compatible with the Smartbits 2000/200 Chassis...
The Spirent SmartBits® LAN-3200A Gigabit Ethernet full-duplex module provides two 1000Base-SX ports with a physical interface of 850 nanometer, multi-mode fiber.1000Base-SX Ethernet, 2-port, multi-mode, 850nm module All modules transmit and receive beyond wire-rate speed High port density for generating heavy and realistic loads. Generates, monitors, and captures data. Generates good and errored traffic. Generates oversized and undersized frames..
Various revisions available -- SmartBits 6000, 6000B, and 6000C..
The Spirent Smartbits LAN-3100A Ethernet full-/half-duplex module provides (8) IEEE 10/100Base-T ports. These ports support autonegotiation, flow control, VLAN tagged fields, and 1,522 byte packets per IEEE 802.p, 802.q and 802.3ac. Data capture is provided for up to 16 MB of packet data. Full/half duplex. RJ-45 interface. Requires one slot in SMB-600 or SMB-6000. Transmit and receive beyond wire-rate speed High port density for generating heavy and realistic loads Generates, monitors, and captures data Ge..
This card operates at 45 Mbps, has BNC connectors, functions as an ATM SmartCard, and supports xDSL.It is designed to work in the SmartBits® SMB-10, SMB-200, and SMB-2000 chassis...
The ATM series of SmartBits compatible SmartCards is used to generate and monitor ATM network traffic. Applications include testing ATM-to-LAN internetworking devices, very high performance ATM backbones, xDSL devices, and LAN-to-ATM, edge devices. The capabilities of the ATM SmartCards include frame-level testing at full-duplex, full wire-rate testing of edge devices and switches, switch testing at full-cell rate, and high-rate signaling testing for edge devices.It is designed to work in the SmartBits SM..
Channelized E1 WAN 4-Port SmartCard for SMB200 2000..
