ATLAS 550 User Interface Module. Provides 4 ISDN S/T Interfaces for User Termination applications.Module emulates Net 3 EuroISDN (with SPIDs and SPIDless), Lucent 5E, DMS100, and National ISDN protocols. Includes 4 RJ45-RJ11 cables (7 ft.). Can only be used in a user interface module slot...
Provides four ISDN BRI U-Interfaces
BRI ports can be independently configured to emulate or terminate ISDN circuits from an ISDN switch
Compliant with Lucent 5ESS, Nortel DMS100 and National ISDN
Any BRI port can serve as timing source for system
ANSI T1.601 compliant..
Independently configurable for DS-1, DSX-1, or PRI operation, Supports Drop/Insert and 1/0 Digital Cross-Connect (DACS) applicationsProduct Name: ATLAS 550 Quad T1/PRI Modl
Product Type: T1/PRI Module
Compatibility: ADTRAN ATLAS 550 Router
Application/Usage: Wide Area Network
Interfaces/Ports: 4 x Channelized T1/ISDN PRI
Interfaces/Ports Details: 4 x Channelized T1/ISDN PRI
Data Transfer Rate: 1.54 Mbps T1
Interface Type: Channelized T1/ISDN PRI
Number of Ports/Channels: 4..
Provides interfaces that are independently configurable for DS-1, DSX-1, or PRI operationSupports Drop/Insert and 1/0 Digital Cross-Connect (DACS)applicationsEither T1 or PRI circuit can serve as timing source for systemSupports PRI switching applicationsSupports Frame Relay applications...
Single network interface configurable for DS-1, DSX-1 or PRI, Supports Drop/Insert and 1/0 Digital Access Cross-Connect Systems (DACS) applications, Supports PRI switching applications, Supports Frame Relay applicationsProduct Name: ATLAS 550 T1/PRI Modl
Product Type: Interface Module
Compatibility: ADTRAN Atlas 550 Router
Application/Usage: Data Networking
Interfaces/Ports: 1 x Channelized T1/ISDN PRI
Interfaces/Ports Details: 1 x Channelized T1/ISDN PRI
Data Transfer Rate: 1.54 Mbps T1
Interface Type: C..
The ADTRAN ATLAS 550 Octal E&M module provides eight ports for 2-wire and 4-wire E&M applications for PBXs, key systems, and leased line analog modems.Frequency Response: 300-3400 hz (+/-1.0dB), Flash upgradeable. Operating Modes: 4-Wire E&M, 2-Wire E&M, 4-Wire Transmission Only (No signaling), 2-Wire Transmission Only (No signaling). Signaling Modes: E-Lead originate, Types I, II, III, IV, VProduct Name: ATLAS 550 User Interface Module Provides 8 E&M or to Interface
Product Type: Expansion Module
Compa..
ATLAS 800 functions as T1/T3 bandwidth manager, ISDN access switch, remote access concentrator, 3/1/0 Digital Access Cross-Connect System (DACS), and includes intelligent call routing. It features standalone, rackmount, or wallmount installations. There are two network interfaces, each independently configurable for T1, DSX-1 or PRI operation, eight expansion slots accept hot-swappable modules, 10BaseT Ethernet interface for SNMP/Telnet management. The unit has optional redundant power supply...
ATLAS 800 Series option module. Module provides two independent Video Ports for videoconferencing applications. Each Video Port provides an RS-366 dialing interface and an EIA-530 synchronous interface. When used with the Nx56/64 BONDING Module (Part #1200262L1), EIA-530 rates can range from 112K to 1472K.NOTE: Module is not supported in the ATLAS 800...
ATLAS 800 Series option module.Module provides two independent Video Ports for videoconferencing applications. Each Video Port provides an RS-366 dialing interface and an RS-449 synchronous interface. When used with the Nx56/64 BONDING Module (Part #1200262L1), RS-449 rates can range from 112K to 1472K. Includes two ATLAS Video RS-449 cables. NOTE: Module is not supported in the ATLAS 800...
Each of the eight interfaces may be mapped to an individual DS0 or dynamically switched based on phone numbers in the dial plan Includes ring generatorSupports loop start, PLAR, and wink delay (for DNIS), Caller ID number supported with FSK (name also supported on PRI 5ESS circuit)Product Name: ATLAS 800 Series Octal FXS Module (for ATLAS 830 and 890)
Product Type: Expansion Module
Compatibility: ATLAS 830, ATLAS 890
Product Model: 1200338L1
Product Line: ATLAS
Application/Usage: Data Networking
Interfa..
The Quad T1/PRI module combines with other ATLAS components to implement a variety of WAN access products, including a T1 Bandwidth Manager, an ISDN Access Switch, and a Digital Access Cross-connect System (DACS). The module provides four network ports, each of which can be independently configured to operate in T1 (DS-1 or DSX-1) or Primary Rate ISDN (PRI) modes. The Quad T1/PRI module can perform T1- to-PRI conversion, translating between the robbed-bit signaling presented in a channelized T1 circuit and ..