Your shopping cart is empty!
Your shopping cart is empty!
The DS1M Module multiplexes / demultiplexes one STS-1 into 28 DSX-1 circuits using the signal from the OPTI-6100 OMM modules. The 28 DS1 circuits are M13 mapped. These circuits are made available through the champ connectors on the backplane of the OPTI-6100 chassis and are usually routed to a DSX panel. With the use of two modules, equipment protection is available. Delivers 28 DS1s...
OPTI-6100 28 port DS1 VT mapped tributary module, enhanced..
The OPTI-6100 DS3M3T IEEE 1613 has been tested to IEEE 1613 standards and is suitable for applications in electric power substations. The basic functionality and performance remains the same as the basic NEBS-compliant OPTI-6100 utilized in carrier applications. Customers should be aware that 1613 compliance is, in most cases, mutually exclusive with Telcordia NEBS Level 3 testing, therefore, modules are either NEBS- or 1613-compliant, but not both, on the same modules. Care should be taken to order the cor..
DS3 switch module for the OPTI-6100 LMX chassis. When used in conjunction with DS3 tributary modules, provides for 1:4 protection for DS3 circuits...
Product Name: Opti-6100 Enhanced Fan Assembly Product Type: Fan Tray Number of Fans: 4 Compatible Rack Width: 23" Indicators & Controls: LED indications for single or multiple fan failures Compatibility: Adtran OPTI-6100 MX Chassis..
The OPTI-6100 ETHM maps and demaps an STS-3c to and from up to three10/100 Base-TX Ethernet ports, utilizing the ITU-T G.7041 GFP protocol. These signals are made available through three RJ-45 connectors on the front of the ETHM Module. (Max. of 12 per MX chassis; 4 per SMX chassis)...
This is an OPTI-6100 advanced Ethernet module with 610/100 ports and 2 GigE copper ports. It provides Ethernet over SONET and can utilize from 1 to 24 STS payloads...
The OPTI-6100 Fiber Routing Tray organizes optical fibers and Ethernet cables from the OPTI-6100 chassis. The fiber trap is 19-inch or 23-inch rack-mountable and installs in 1U space (1.75 inches)...
The 1184538L1 OPTI-6100 Heat Baffle is utilized with the OPTI-6100 chassis in applications that require the airflow characteristics of a heat baffle. The 1184538L1 is a 1U baffle with 19-in. mounting and is primarily designed for applications where an 1184537L1 HFANM is utilized...
HFANM fan module assembly for the OPTI-6100 MX Chassis...
The OPTI-6100 High-Capacity Fan Assembly (HFANM, P/N 1184537L1) provides forced air ventilation and cooling for the OPTI-6100 Chassis and all of its associated modules. Replacement fan modules (P/N 1184542L1) can be ordered separately. This is a plug-in assembly and can be replaced without powering down the chassis...
TheOC-12 Small Form-Factor Pluggable, Single-Mode, 1310nm Intermediate Reach optical moduleplugs intothe ADTRAN O12TME2 module (1184544G2) and provides a SONET OC-12 (622.08 Mb/s) interface. Optional equipment protection is supported via redundant modules...
Pluggable fan module for the OPTI-6100 LMX chassis..
The OPTI-6100 LMX chassis is a compact 19-inch or 23-inch rack-mountable chassis for the OPTI-6100 Multi-service Provisioning Platform. The LMX chassis hosts optical multiplexer (OMM) modules to terminate OC-48 fiber circuits, and tributary modules to deliver DS3, EC1, DS1, OC-3, OC-12, or 10/100/1000 Ethernet services. A DS3 switch module is provided for enhanced DS3 protection. The OPTI-6100 LMX chassis utilizes current tributary modules common to the OPTI-6100 MX and SMX chassis.Cooling via an integrat..
The 1-Port OC-48 Long Reach SFP Module plugs into ADTRAN OC-48 modules designed to accept Small Form-Factor pluggable. Installed into an appropriate host module, the 1-Port OC-48 Long Reach SFP Module provides an OC-48 interface to the supporting system.Product Name: Opti-6100 LR Optics SFP OC48 Product Type: SFP Compatibility: OPTI-6100 Chassis Product Model: 1184560P1 Application/Usage: Data Networking Interfaces/Ports: 1 x OC-48 Interfaces/Ports Details: 1 x OC-48 Data Transfer Rate: 2.49 Gbps OC-48 In..