Your shopping cart is empty!
Your shopping cart is empty!
The Juniper Networks Multi-Rate SONET/SDH PB-4OC3-1OC12-SON2-SFP PIC Module that supports rich packet processing, multiple IP services, and uncompromising performance while offering market-leading port density and flexibility. This module provide IP-over-SONET/SDH optical connectivity to backbone and access circuits.Possible Interface: 4 x OC-3/STM-1, 1 x OC-12/STM-4 OC-3/STM-1: Distance support MMF: 2km, Distance support SMF: 40km, Wavelength: 1263 through 1360nm OC-12/STM-4: Distance support: 40km, Wa..
Power requirement: 5 A @ 12 V (60 W) Model number: MS-MIC-16GHardware FeaturesActive monitoring on up to 14 million flows MICs are hot-removable and hot-insertable. Note: Only one Multiservices MIC is supported in each MPC.Software FeaturesSupport for up to 6000 service sets Support for MTUs up to 9192 bytes...
The Juniper Networks Multi-Rate SONET/SDH PB-4OC3-4OC12-SON-SFP 4 Port PIC Module that supports rich packet processing, multiple IP services, and uncompromising performance while offering market-leading port density and flexibility. This module provide IP-over-SONET/SDH optical connectivity to backbone and access circuits.Possible Interface: 4 x OC-3/STM-1, 4 x OC-12/STM-4, 4 x OC-48/STM-16 OC-3/STM-1: Distance support MMF: 2km, Distance support SMF: 40km, Wavelength: 1263 through 1360nm OC-12/STM-4: Di..
Juniper Networks Multiservice Interface MICs deliver the most widely used multiservice interfaces including DS3, OC3, OC12, and OC48. The Multiservice Interface MICs deliver these interfaces on all the MX Series routers. This allows the MX Series to address various multiservices scenarios, permitting service delivery with a single versatile platform. The Multiservice Interface MICs extend the latest advancements in traffic management technology, allowing service providers and enterprises to meet their most ..
Manufacturer: Juniper Networks, Inc Manufacturer Part Number: CTP2000-IM-8P Brand Name: Juniper Product Model: CTP2000-IM-8P Product Name: CTP2000-IM-8P Interface Module Product Type: Interface Module Application/Usage: Data Networking Compatibility: Juniper Networks CTP2000 Circuit to Packet Platforms..
The Multiservice module enables an interrange instrumentation group time code (IRIG-B) signal to be transported through an IP network. The IRIG-B standard consists of a family of rate-scaled serial time codes with formats containing up to three coded expressions or words. The IRIG-B pulse code contains one frame of 100 elements per second for the time of the year and GPS receiver status. IRIG-B encodes day of year, hour,minute, and second data on a 1-KHz carrier frequency, with an update rate of once per se..
Juniper Networks MultiServices 100 PIC is a module that supply hardware acceleration for an array of packet processing- intensive services in the M Series and T Series routers. Today these services include stateful firewall, NAT, IPsec, Dynamic Application Awareness (DAA), Session Border Control (SBC), L2TP Network Server (LNS), J-Flow monitoring and collection, (cflowd version 5, version 8 and version 9), Lawful Intercept, Link Services like Multilink Frame Relay (MLFR), Multilink Point-to-Point Protocol (..
The Multiservices Physical Interface Card Type 1 implements all services on the router itself, eliminating discrete devices and layers of network and management complexity, which results in lower cost of ownership. The Multiservices Physical Interface Card Type 1 can provide hardware acceleration for any PIC present in the router chassis, allowing providers to deliver consistent services across all interfaces.Manufacturer: Juniper Networks, Inc Manufacturer Part Number: PE-MS-100-1 Brand Name: Juniper Pro..
Juniper Networks Multiservices PIC (MS-PIC) are modules that supply hardware acceleration for an array of packet processing- intensive services in the M Series and T Series routers. Today these services include stateful firewall, NAT, IPsec, Dynamic Application Awareness (DAA), Session Border Control (SBC), L2TP Network Server (LNS), J-Flow monitoring and collection, (cflowd version 5, version 8 and version 9), Lawful Intercept, Link Services like Multilink Frame Relay (MLFR), Multilink Point-to- Point Prot..
A MX-FPC2 Flexible PIC Concentrator occupies two DPC slots on an MX-series router. On an MX-FPC2, two Packet Forwarding Engines receive incoming packets from the PICs installed on the FPC and forward them through the switch planes to the appropriate destination port. The FPCs interface with the power supplies and SCBs.Manufacturer: Juniper Networks, Inc Manufacturer Part Number: MX-FPC2 Brand Name: Juniper Product Model: MX-FPC2 Product Name: MX-FPC2 Flexible PIC Concentrator Product Type: Expansion Modul..
Manufacturer: Juniper Networks, Inc Manufacturer Part Number: DPCE-X-4XGE-XFP Brand Name: Juniper Product Name: 4 Port XFP Expansion Module Product Type: Expansion Module Application/Usage: Data Networking Expansion Slots: 4 x XFP Compatibility: Juniper Networks MX-series Ethernet Services Routers..