Your shopping cart is empty!
Your shopping cart is empty!
The Juniper Dual-port Fast Ethernet PIM provides the physical connection to Ethernet network media types, receiving incoming packets from the network and transmitting outgoing packets to the network. The Juniper Dual-port Fast Ethernet PIM is equipped with a dedicated network processor that forwards incoming data packets to the Routing Engine, and receives outgoing data packets from the Routing Engine. During this process, the PIM performs framing and line-speed signaling.This PIM includes two physical F..
Integrated single chip Intel 82546 dual port MAC/PHY/Serdes, High-performance wire speed, 484 MB/sec (3.8 Gb) sustained raw throughput over 133/100/66 PCI-X, Advanced protocol stack CPU-offload features, Ultra-low power transceiver consumes..
Integrated single chip Intel 82546 dual port MAC/PHY/Serdes, High-performance wire speed, 484 MB/sec (3.8 Gb) sustained raw throughput over 133/100/66 PCI-X, Advanced protocol stack CPU-offload features, Ultra-low power transceiver consumes..
Manufacturer: Juniper Networks, Inc Manufacturer Part Number: SRX3K-2XGE-XFP Brand Name: Juniper Product Model: SRX3K-2XGE-XFP Product Name: SRX3K-2XGE-XFP Gigabit Ethernet XFP I/O Module Product Type: I/O Module Application/Usage: Data Networking Data Transfer Rate: 10 Gbps Gigabit Ethernet Expansion Slots: 2 x XFP Compatibility: Juniper Networks SRX3000 Services Gateway..
Manufacturer: Juniper Networks, Inc Manufacturer Part Number: NS-5000-2XGE-G4 Brand Name: Juniper Product Name: 2 x 10GigE Secure Port Module Product Type: Expansion Module Application/Usage: Data Networking Data Transfer Rate: 10 Gbps Gigabit Ethernet Expansion Slots: 2 x XFP Compatibility: Juniper Networks NetScreen-5000 Series..
The 2XGE APS I/O module uses a range of small form-factor pluggable transceivers (SFPs) to support different optical modes and cabling distances.Manufacturer: Juniper Networks, Inc Manufacturer Part Number: ERX-2GE-IOA Brand Name: Juniper Product Name: 2+2 Port GE IOA Product Type: I/O Module Application/Usage: Data Networking Interfaces/Ports: 4 x Gigabit Ethernet Interfaces/Ports Details: 4 x LC Gigabit Ethernet Connectivity Media: Fiber Data Transfer Rate: 1 Gbps Gigabit Ethernet Full-duplex Compatibil..
The 10 Gigabit Ethernet (10GBASE-T), based on the IEEE 802.3a standard, is a telecommunication technology that offers data speeds up to 10 billion bits per second.The 10 Gigabit Ethernet is used to interconnect LANs, WANs, and metropolitan area networks (MANs). The 2-Port 10 Gigabit Ethernet XPIM can provide multiple service levels (1 Gigabit Ethernet to 10 Gigabit Ethernet in increments) and a single connection option for a wide range of customer needs and applications.Product Name: 2 Port 10GBE SFP+ ..
Manufacturer: Juniper Networks, Inc Manufacturer Part Number: IDP-10GE-2XFP Brand Name: Juniper Product Name: 2-port 10 GigE XFP Interface Card Product Type: Interface Module Application/Usage: Data Networking Data Transfer Rate: 10 Gbps Gigabit Ethernet Expansion Slots: 2 x XFP Compatibility: IDP 8200 Security Appliance..
Manufacturer: Juniper Networks, Inc Manufacturer Part Number: P-2OC3-ATM-MM Brand Name: Juniper Product Model: P-2OC3-ATM-MM Product Name: OC-3/STM-1 Physical Interface Card Product Type: Interface Module Application/Usage: Data Networking Interfaces/Ports: 2 x OC-3/STM-1 Interfaces/Ports Details: 2 x SC OC-3/STM-1 Connectivity Media: Multi-mode Fiber Data Transfer Rate: 155.52 Mbps OC-3/STM-1 Additional Information: Range: 2 km Compatibility: Juniper M20 Router, Juniper M40 Router, Juniper M40e Router..
Juniper Networks ATM and ATM2 Physical Interface Cards (PICs) offer flexible, highly-available solutions for the termination of ATM access networks, and provide support for the progressive transition to an all-IP/MPLS infrastructure. The PB-2OC3-ATM-MM OC-3/STM-1 Optical Interface Module provides an ideal solution for building backbones or edge networks using high-speed OC-3/STM-1 circuits. Delivers predictable throughput at 155 Mbps.Manufacturer: Juniper Networks, Inc Manufacturer Part Number: PB-2OC3-AT..
Juniper 2-port ATM OC3/STM1 PIC, Multi-Mode PIC Works with M10, M10i, M5, M7, M7i, M20 series routers.Juniper Networks ATM and ATM2 Physical Interface Cards (PICs) offer flexible, highly-available solutions for the termination of ATM access networks, and provide support for the progressive transition to an all-IP/MPLS infrastructure. The PE-2OC3-ATM-MM OC-3/STM-1 Optical Interface Module provides an ideal solution for building backbones or edge networks using high-speed OC-3/STM-1 circuits. Delivers predi..
Enhanced ATM2 IQ PICs offer improvements in QoS granularity, traffic statistics, control and diagnostics. Delivers predictable throughput at 622 Mbps.The ATM2 IQ PICs leverage the JUNOS operating system's MPLS traffic engineering and hardware-based QoS capabilities to deliver seamless transport of multiservice traffic over the IP/MPLS infrastructure. Designed to provide rich, granular ATM QoS and signaling functionalities, the ATM2 IQ PICs are a key element in the delivery of a guaranteed high-quality, e..
Enhanced ATM2 IQ PICs offer improvements in QoS granularity, traffic statistics, control and diagnostics. Delivers predictable throughput at 155 Mbps.The ATM2 IQ PICs leverage the JUNOS operating system's MPLS traffic engineering and hardware-based QoS capabilities to deliver seamless transport of multiservice traffic over the IP/MPLS infrastructure. Designed to provide rich, granular ATM QoS and signaling functionalities, the ATM2 IQ PICs are a key element in the delivery of a guaranteed high-quality, en..
