Your shopping cart is empty!
Your shopping cart is empty!
The SIBs create the switch fabric for the router, providing up to a total of 640 million packets per second (Mpps) of forwarding. Five SIBs are installed in the router. The SIBs are located at the center rear of the chassis in the slots labeled SIB0 through SIB4 (top to bottom).Manufacturer: Juniper Networks, Inc Manufacturer Part Number: SIB-TXP-T1600-S Brand Name: Juniper Product Model: SIB-TXP-T1600 Product Name: SIB-TXP-T1600 Switch Interface Board (SIB) Module Product Type: Switch Fabric Module Appli..
Juniper Networks Ethernet Physical Interface Card (PIC) enhance network scalability and flexibility in both core and edge networks by supporting predictable performance, standards-based features, and a wide range of port densities and speeds. Gigabit speeds range from 1 Gbps per port. M-series Ethernet ports are routed, not switched, which enables service providers to deliver rich IP services at full speed, such as VPNs and multicasts.Manufacturer: Juniper Networks, Inc Manufacturer Part Number: P-1GE-SX-..
Juniper Networks Ethernet Physical Interface Card (PIC) enhance network scalability and flexibility in both core and edge networks by supporting predictable performance, standards-based features, and a wide range of port densities and speeds. Gigabit speeds range from 1 Gbps per port. M-series Ethernet ports are routed, not switched, which enables service providers to deliver rich IP services at full speed, such as VPNs and multicasts.Manufacturer: Juniper Networks, Inc Manufacturer Part Number: P-1GE-LH ..
The Juniper Networks ADSL2/2+ Mini-Physical Interface Module (Mini-PIM) is for use with the SSG 20 platform. The ADSL2/2+ Mini-PIM supporting Annex A (over POTS) include one physical ADSL port that support ADSL, ADSL2 or ADSL2+ protocols.Automatic configuration of ADSL line after negotiating with the DSLAM minimizing configuration, Dying Gasp support, MLPPP over two ADSL Cards, Supports ATM AAL5 with CBR, VBR-nrt and UBR traffic types. Diagnostics: OAM F4 far loopback test, OAM F4 near loopback test, OAM ..
The Juniper Networks ADSL2/2+ Mini-Physical Interface Module (Mini-PIM) is for use with the SSG 20 platform. The ADSL2/2+ Mini-PIM supporting Annex B (over ISDN)) include one physical ADSL port that support ADSL, ADSL2 or ADSL2+ protocols.Automatic configuration of ADSL line after negotiating with the DSLAM minimizing configuration, Dying Gasp support, MLPPP over two ADSL Cards, Supports ATM AAL5 with CBR, VBR-nrt and UBR traffic types Diagnostics: OAM F4 far loopback test, OAM F4 near loopback test, OAM..
The Juniper Networks single-port E1 Mini Physical Interface Modules (Mini-PIM) for the SSG 20 platform complement the five on-board 10/100 Ethernet interfaces with expanded WAN connectivity. The E1 Mini-PIMs include one physical E1 port with an integrated CSU/DSU.The combination of a E1 modem and an integrated CSU/DSU eliminates the need to deploy several separate external devices, thereby consolidating devices to reduce capital expenditures, saving valuable space and simplifying management.Full and fr..
The Juniper E3 PIM provide the physical connection to E3 network media types, receiving incoming packets from the network and transmitting outgoing packets to the network. The Juniper E3 PIM is equipped with a dedicated network processor that forwards incoming data packets to the Routing Engine, and receives outgoing data packets from the Routing Engine. During this process, the PIM performs framing and line-speed signaling.This PIM include either one physical DS3 port with integrated DSU and a physical ..
The Juniper Networks optional single-port serial Mini-PIM for the SSG 20 platform complements the five on-board 10/100 Ethernet interfaces with expanded WAN connectivity. The single-port serial Mini-PIM is equipped with a dedicated network processor that forwards traffic to the SSG 20 CPU where traffic decisions are made based upon security policies. This allows the SSG 20 to be deployed as a security appliance or as a secure router where serial connectivity is required.Supported Serial Network Media: X.2..
The Juniper Networks optional single-port SFP Mini Physical Interface Module (Mini-PIM) for the Secure Services Gateway 20 (SSG 20) platform complements the five on-board 10/100 Ethernet interfaces with expanded LAN or WAN connectivity.Supported Transceiver Types: 1000BASE-T SFP, Gigabit Ethernet SFP, LC Connector, LX transceiver, Gigabit Ethernet SFP, LC Connector, SX transceiver, 100BASE-FXProduct Name: 1 Port Small Form-Factor Pluggable SFP Mini Product Type: Interface Module Compatibility: Juniper N..
The Juniper Networks single-port T1 Mini Physical Interface Modules (Mini-PIM) for the SSG 20 platform complement the five on-board 10/100 Ethernet interfaces with expanded WAN connectivity. The T1 Mini-PIMs include one physical T1 port with an integrated CSU/DSU.The combination of a T1 modem and an integrated CSU/DSU eliminates the need to deploy several separate external devices, thereby consolidating devices to reduce capital expenditures, saving valuable space and simplifying management.Full and fr..
Multiplexing and demultiplexing, Rate policing on input, Rate shaping on output, Packet buffering, Layer 2 parsingProduct Name: Small Form Factor Pluggable OC3 Reach (IR) SM Optic Module Product Type: SFP Product Model: SFP-OC3-IR Application/Usage: Data Networking Interfaces/Ports: 1 x OC-3 Interfaces/Ports Details: 1 x LC Duplex OC-3 Data Transfer Rate: 155.52 Mbps OC-3 Connectivity Media: Single-mode Optical Fiber OC-3 Interface Type: OC-3 Number of Ports/Channels: 1..
Manufacturer: Juniper Networks, Inc Manufacturer Part Number: CBL-SMZ-BNC-M-S Brand Name: Juniper Product Name: SMZ to BNC Coaxial Cable (Spare) Product Type: Network Cable Cable Type: Coaxial Cable Length: 10 ft Connector on First End: Proprietary Connector Connector on Second End: BNC Conductor: Copper Additional Information: SMZ connector Compatibility: Juniper M10i/M7i Multiservice Routers, Juniper DS3/E3 Physical Interface Cards, Juniper M5/M10 Routers..
EX3-1GSRP-MOD Source Route Processor Module for the ERX-310, used with EX3-310ACIG-SYS and EX3-310DC1G-SYS systems and requires EX3-SRP-IOA. 1G of on board SRP memory.Manufacturer: Juniper Networks, Inc Manufacturer Part Number: EX3-1GSRP-MOD Brand Name: Juniper Product Model: EX3-1GSRP-MOD Product Name: EX3-1GSRP-MOD Source Route Processor Module Product Type: Route Processor Application/Usage: Wide Area Network Additional Information: 1G of on board SRP memory System Requirements: Juniper EX3-SRP-IOA Co..
