Your shopping cart is empty!
Your shopping cart is empty!
The 3Com 3C10114 NBX Analog Line Card connects up to four Loop Start PSTN telephone lines to the NBX 100 / V3000 / V5000 via RJ-11 interfaces, and includes build-in Caller ID support and a built-in power failure transfer jack...
The 3C10117 NBX Analog Terminal Card connects up to 4 analog tip/ring (2500 series compatible) devices, such as an analog phone, cordless phone, Group 3 FAX machine, speaker phone adjuncts, etc. Does NOT support modems...
The NBX 100 Call Processor is at the heart of the 3Com NBX 100 communications system. The NBX 100 Call Processor can support up to 12 auto-attendant ports, 200 voice mailboxes, and 80 hours of message storage, making it ideal for demanding small and midsize businesses. The NBX 100 Call Processor supports up to 200 devices - phones, voice mail ports, and PSTN lines and employs UNIX-based VxWorks operating system to maximize reliability in mission-critical applications...
The NBX digital line card connects a standard T1 circuit to the NBX 100 system. This card includes an MDI-X port for connecting to a LAN switch port to optimize network loading. The card supports robbed-bit or PRI services...
NBX T1 Trunk Digital Line Card (DLC). ISDN PRI T1 terminal adapter. Plug-in module. Ethernet 1000Base-T RJ-45. Management RS-232 - 9 pin D-Sub (DB-9)...
This flash memory upgrade from 3Com is designed for the NetBuilder family of routers...
The Dual Processor Engine (DPE) series module is the central processor for the NETBuilder II system. It includes a flash memory drive for the system software as well as a second flash memory drive for back-up. Firmware parameters set with the software SysconF command and with the firmware boot monitor are stored on the flash PROM (FPROM). A console port on the front of the module provides local management. The DPE module, in combination with the 800 Mbps backplane, delivers consistently high throughput for ..
HSS 4-Port WAN Module for 3Com NETBuilder II is a standard format module including a hydra cable that fans out to four cables, each with a FlexWAN connector. This module supports RS-232, V.35, X.21, RS-449, and EIA530 signalling in DTE or DCE mode through the use of auto-sensing FlexWAN cables. It features four ports at T1/E1 rates concurrently, or two ports at 4 Mbps concurrently...
Affordable 10/100 Switching -- Are bandwidth-intensive applications slowing your network to a crawl? This economical entry-level switch speeds database and accounting applications and file exchange. For the cost conscious, the Switch 5 offers high-quality, reliable networking at a very affordable price. Five autosensing ports automatically detect the speed of the attached device to maximize network performanceWith plug-and-play installation and no configuration needed, the switch fits easily into your u..
The OfficeConnect Dual Speed Hub 16 joins a range of products designed to take the worry out of building and running a network for small business, branch office, and home office environments. The Dual Speed Hub 16 is ideal for those wishing to extend an existing Ethernet network into Fast Ethernet. With its sixteen auto-sensing ports you can support Ethernet and Fast Ethernet traffic, delivering higher bandwidth to some users while maintaining the status quo for those who are efficiently served by 10Mbps Et..
The hub is designed for growing small businesses with basic network needs such as file or peripheral sharing. It supports up to 16 users or devices; an autosensing BNC port connects to legacy Ethernet networks. 3Com OfficeConnect products let you share computer resources, access the Internet, and connect to remote locations or users...
The OfficeConnect 3C16703A ethernet hub is specifically designed for small businesses with basic network requirements, such as file or peripheral sharing, or for those who simply want to add additional users to a 10BASE-T network. OfficeConnect 3C16703A ethernet hub offer compatibility with legacy coax or thick Ethernet networks and provide connections for 4, 8, or 16 users or networked devices.Device Type Hub System Requirements Microsoft Windows 95/98, Novell NetWare, Microsoft Windows 2000, Microsoft W..
