Cisco RSP16 Route Switch Processor 16

The Route Switch Processor 16 (RSP16) is the newest and highest-performance main system processor for the Cisco 7500 Series Router. The RSP16 supports up to 1 GB of program memory, allowing customers to significantly increase their route tables. The RSP16 provides significant performance enhancements, increasing switching performance by 20 percent and 55 percent compared the RSP8 and RSP4+, respectively. The RSP16 is available in new system deployments and as an upgrade to existing RSP8, RSP4+, or RSP2-based systems. The RSP16 is compatible with existing Versatile Interface Processors (VIPs), including the new Cisco VIP6-80 and port adapters that are supported with existing VIPs. The RSP16 fully supports Cisco 7500 Series high-availability features, including Single Line Card Reload, Route Processor Redundancy, Fast Software Upgrade (FSU), Nonstop Forward (NSF), and Stateful Switch Over (SSO). This support allows the Cisco 7500 Series routers to demonstrate some of the highest uptime in the industry. FSU allows customers to upgrade their existing RSP2, RSP4+, and RSP8 to RSP16 with minimal downtime. The RSP16 is an ideal platform for enterprise and service provider networks that require additional performance and processing power to support service-enabled edge and core applications.

Item Included: RSP16 Flash Disk: 64 MB Option (MEM-RSP16-FLD64M), RSP16 128MB ECC SDRAM Memory Option (MEM-RSP16-128M) ECC protected memory: Helps maintain system availability with parity protected memory Global Resilience IP: RPR, FSU, NSF, SSO

Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: RSP16=
Brand Name: Cisco
Product Name: Route Switch Processor 16
Product Type: Route Switch Processor
Application/Usage: Wide Area Network
Interfaces/Ports: 2 x Asynchronous Serial LAN
Interfaces/Ports Details: 1 x DB-25 Female Console Management
Interfaces/Ports Details: 1 x DB-25 Male Auxiliary Management
Expansion Slots: 2 x PC Card
Management: Simple Network Management Protocol (SNMP) agent V1 (RFCs 1155-1157), Management Information Base (MIB) II (RFC 1213)
Protocols: IP
Processor: 1 x R7000A 400 MHz
Memory: 128 MB SDRAM Installed
Memory: 256 MB SDRAM Upgradeable
Memory: 512 MB SDRAM Upgradeable
Memory: 1 GB SDRAM Upgradeable
Memory: 8 MB SRAM Installed
Memory: 2 MB Layer 3 Cache Memory Installed
Memory: 2 MB NVRAM Installed
Memory: 16 MB Flash Memory Installed
Memory: 64 MB Flash Drive Installed
Memory: 128 MB Flash Drive Upgradeable
Memory: 512 KB Boot Flash Installed
Memory: 256 KB Layer 2 Cache Memory Processor Installed
Status Indicators: Normal, CPU halt, Active, Standby, Slot 0 PC Card, Slot 1 PC Card
Temperature: 32°F (0°C) to 104°F (40°C) Operating
Temperature: -40°F (-40°C) to 167°F (75°C) Storage
Humidity: 10% to 90% Non-condensing Relative Humidity
Altitude: -196.84 ft to 13123.32 ft Operating
System Requirements: Software Requirements: The Cisco RSP16 is supported in the following images and higher: - Cisco IOS Software Release 12.1(12)E - Cisco IOS Software Release 12.0(22)S - Cisco IOS Software Release 12.2(13)T
Compatibility: Cisco 7505 Series routers, Cisco 7507 Series routers, Cisco 7513 Series routers, Cisco RSP16 is compatible with existing VIPs as well as the new Cisco VIP6-80

This Cisco RSP16 Route Switch Processor 16 is in refurbished condition and is fully guaranteed by our 90-day warranty. Please feel free to contact us regarding our inventory of refurbished Cisco networking equipment, or if you have any additional questions regarding this RSP16 Route Switch Processor 16.