Cisco AIM-ATM-1T1 High Performance ATM Bundle, AIM-ATM with VWIC-1MFT-T1
The AIM-ATM optimizes the Cisco 2600, 2600XM, 2691, 3660, and Cisco 3700 Series modular multiservice routers by offering ATM adaptation layer 2 (AAL2) and ATM adaptation layer 5 (AAL5) support for low-density T1/E1 data and voice connections over ATM networks. This AIM module allows service providers and enterprise customers to take advantage of the reliability and quality of service (QoS) available with ATM connectivity.
Maximum number of ATM T1/E1s supported: Up to 4 ATM T1/E1's per AIM-ATM, Required Cisco IOS Image: Any Cisco IOS "Plus" Feature Sets Item Included: High Performance ATM Advanced Integration Module (AIM-ATM), 1-Port RJ-48 Multiflex Trunk - T1 (VWIC-1MFT-T1) The AIM-ATM supports the following ATM services: Supports up to four ATM T1/E1 ports per AIM, using two 2-port multiflex T1/E1 VWICs in WIC slots, NM-xFE2W, NM-2W, or NM-HDV, ATM class of service (CoS) features CBR, VBR-nrt, VBR-rt, ABR, and UBR, AAL5: H.323 VoIP, up to four T1/E1 channels of AAL5 (with IMA support), VoATM-AAL2 (trunked only), Supports QoS features: Low-Latency Queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), per-virtual circuit queuing, pre-ATM VC shaping for non - real-time variable bit rate (VBR-nrt), Resource Reservation Protocol (RSVP), IP CoS map to ATM QoS services, CRTP (over Point-to-Point/Multilink over ATM), Permanent virtual circuit (PVC) and switched virtual circuits (SVC) support, where SVC is for data only, ATM Forum UNI 3.0, UNI 3.1, and UNI 4.0, LAN Emulation 2.0 Client and Server, Per VC queuing for segmentation, Support for up to 1024 AAL5 VCs for catalog/voice features, Support for up to1024 AAL2 VCs with up to 255 subchannels each for voice per AIM, Network clock management support, which allows synchronization between the ATM network and PBX/Public Switched Telephone Network (PSTN), 1-Kbps resolution for sustained cell rate (SCR) and peak cell rate (PCR), 32-Kbps minimum traffic rate, 13-bit range for VPI/VCI per interface, Maximum Burst Size (MBS) is up to 255 cells per VC, Dynamic management of the cell scheduler table, Operations and management (OAM) support (F5), Early Packet Discard, AAL5 reassembly time-outs, AAL2 subcell multiplexing support, RFC 1483 support for multiple encapsulations over ATM, RFC 1577 support for routing over ATM, Multiprotocol routing over ATM (MPOA) client and server, IETF PPP over ATM, Next Hop Resolution Protocol (NHRP), ILMI 4.0, IMA 1.1 Support
Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: AIM-ATM-1T1=
Brand Name: Cisco
Product Name: Advanced Integration Module
Product Type: Advanced Integration Module
Application/Usage: Voice
Interfaces/Ports: 1 x T1 WAN
Interfaces/Ports Details: 1 x RJ-48 T1 WAN
Protocols: ATM
Protocols: VoIP
Protocols: PPPoA
Protocols: NHRP
Temperature: 32°F (0°C) to 104°F (40°C) Operating
Temperature: -4°F (-20°C) to 149°F (65°C) Storage
Humidity: 10% to 85% Non-condensing Relative Humidity Operating
Humidity: 10% to 85% Non-condensing Relative Humidity Storage
Dimensions: 0.3" Height x 3.3" Width x 5.3" Depth
System Requirements: Minimum Cisco IOS Release required: Cisco 2600 Series, 3660: 12.2(2)XA/12.2.4T, Cisco 2600XM Series: 12.2.8T1, Cisco 2691, 3700 Series: 12.2(11)YT and 12.2(13)T Hardware Prerequisites: Cisco 2600 and 2600XM: - Available AIM slot - VWIC-MFT for WAN, PSTN or PBX connections, Cisco 3660: - MIX module and available AIM slots - VWIC-MFT in a NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W, or NM-HDV, Cisco 2691, 3700: - Available AIM slot - VWIC-MFT in a chassis WIC slot or in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W, or NM-HDV
Compatibility: Cisco 2610-2613, Cisco 2620, Cisco 2621, Cisco 2650, Cisco 2651, Cisco 2610XM, Cisco 2611XM, Cisco 2620XM, Cisco 2621XM, Cisco 2650XM, Cisco 2651XM, Cisco 2691, Cisco 3661, Cisco 3662, Cisco 3725, Cisco 3745
This Cisco AIM-ATM-1T1 High Performance ATM Bundle, AIM-ATM with VWIC-1MFT-T1 is in refurbished condition and is fully guaranteed by our 90-day warranty. Please feel free to contact us regarding our inventory of refurbished Cisco networking equipment, or if you have any additional questions regarding this AIM-ATM-1T1 High Performance ATM Bundle, AIM-ATM with VWIC-1MFT-T1.
United States of America Shipping
Orders for this Cisco AIM-ATM-1T1 unit which qualify for Free Super-Saver Shipping are shipped at our discretion via the lowest cost method. We use FedEx, UPS, and US Postal Service as shipping carriers. We cannot ship this Cisco AIM-ATM-1T1 within the USA by billing directly to your shipper account number. All shipping charges must be pre-paid at checkout.
International / Foreign Shipping
Cisco AIM-ATM-1T1 High Performance ATM Bundle, AIM-ATM with VWIC-1MFT-T1 units which are shipped internationally have a mandatory 2-5 business day security holding period between payment being received and shipment processing. This security policy is to allow funds to fully clear our bank account. International transport costs can be charged directly to your FedEx account number. We cannot ship internationally using your DHL, TNT, or UPS account number.
Expedited and Rush Shipping
HardwareJet.com can usually provide expedited (1 or 2 day shipping) for Cisco products; however there is an additional rush fee per unique Cisco AIM-ATM-1T1 High Performance ATM Bundle, AIM-ATM with VWIC-1MFT-T1 unit in addition to the product cost and expedited carrier shipping charges. If we can offer expedited shipping for an item, expedited shipping costs will be shown at checkout. If we cannot provide expedited shipping for an item, then you will not be presented with these options during the cart checkout process.